Dell PowerEdge M1000e Manual de uso - Página 36

Navegue en línea o descargue pdf Manual de uso para Servidor Dell PowerEdge M1000e. Dell PowerEdge M1000e 44 páginas. Expansion modules for dell networking switches
También para Dell PowerEdge M1000e: Manual de actualización (44 páginas), Manual de actualización (21 páginas), Manual de actualización (14 páginas), Manual de instalación (7 páginas), Manual de introducción (12 páginas), Manual de introducción (12 páginas), Especificaciones (3 páginas), Manual de introducción (14 páginas), Manual de introducción (12 páginas), Primeros pasos (2 páginas), Manual de referencia (17 páginas)

For more information on configuring the tape and storage components, see

the storage and tape backup documentation.

Cabling Two PowerEdge Server Enclosures to One or Two Dell|EMC Storage

Systems

The PowerEdge blade cluster supports up to two PowerEdge server enclosures

and up to two Dell|EMC storage systems. In this configuration, two inter-

switch links (ISLs) are required to connect each pair of Fibre Channel switch

modules between the PowerEdge server enclosures.

For high availability, each PowerEdge server enclosure requires direct paths to

the attached storage systems. This configuration ensures that all running

applications are available if one of the PowerEdge server enclosures needs to

be shut down for maintenance.

Figure 2-6 shows two PowerEdge 1855/1955 server enclosures cabled to one

supported Dell|EMC storage system in an iSCSI configuration.

Figure 2-7 shows two PowerEdge M1000e server enclosures cabled to two

supported Dell|EMC storage systems in Fibre Channel configuration.

In both figures, the server module's dual-port Fibre Channel daughter card

and Fibre Channel modules are connected internally in the system chassis.

You can use a similar configuration model for other supported server modules,

server enclosures, and storage arrays.

Cabling Your Blade Cluster Hardware