DH Lifelabs H100-24GR Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Césped y jardinería DH Lifelabs H100-24GR. DH Lifelabs H100-24GR 4 páginas.
También para DH Lifelabs H100-24GR: Manual de instrucciones (4 páginas)

Imprimir página

Installation

WARNING: DO NOT CONNECT TO POWER

BEFORE MECHANICAL INSTALLATION

IS COMPLETE. ALWAYS DISCONNECT

POWER BEFORE HANDLING.

Mount Sciaire Pro H100 in a location with general maintenance

access. Ensure the brush tips are not within ¾" of any metallic

surface to prevent arcing.

Mount the unit at or near the fan inlet using the holes in the

mounting flanges, ensuring that the air stream flows over the 2

brush tips simultaneously. See graphic below for reference.

The unit should be mounted downstream of the filter.

Avoid locations directly after a cooling coil or humidifier.

Exit ducts are recommended to install a group of plasma generators

every 20 meters to ensure ion concentration .

Add a group of plasma generators in the middle near the outlet

with a 1-2 meters distance to ensure the concentration of ions in the

room.

Electrical Installation

All field wiring to be in accordance with NEC and Authorities Having

Jurisdiction (AHJ).

It is recommended that surge protection be installed with this

ionizer at the equipment level, building level, or circuit breaker

panel feeding the product.

If a step-down transformer is used to feed the ionizer, the

transformer must be grounded (recommended 20 VA minimum).

Do not install the ionizer on the same circuit as a UV Lamp or

connect to the same transformer as a UV Lamp.

Connect power to the ionizer using appropriate voltage.

The installer shall provide a power source that is properly grounded

per the local AHJ.

For best results interlock ionizer with fan power.

Apply power to unit. Confirm that green indicator light illuminates

indicating that the ionizer is functioning properly.

Operation

When power is supplied to the ionizer, the ionizer will be activated,

and the green ion indicator LED will illuminate.

The ionization unit is self-balancing and does not require any type

of adjustment.

Sequence of Operation

For units that are interlocked with the supply fan control, the

BAS controls the start/stop of the air conditioning unit supply

fan.