Dell PowerEdge R910 Información actualizada - Página 12

Navegue en línea o descargue pdf Información actualizada para Servidor Dell PowerEdge R910. Dell PowerEdge R910 17 páginas. Poweredge series
También para Dell PowerEdge R910: Actualización de la documentación (14 páginas), Manual de actualización (32 páginas), Actualización (3 páginas), Instalación del hardware (2 páginas), Información actualizada (14 páginas), Manual de actualización (44 páginas), Manual de cartera (27 páginas)

Repeat step 5 through step 7 of this procedure to install the remaining

memory modules. See Table 3-1 and Table 3-2 in the Hardware Owner's

Manual.

8 Press the four tabs and close the memory module cover. See Figure 3.

9 Install the memory risers. See "Installing a Memory Riser" in the Hardware

Owner's Manual.

10 Close the system. See "Closing the System" in the Hardware Owner's

Manual.

11 Reconnect the system to its electrical outlet and turn the system on,

including any attached peripherals.

12 Press <F2> to enter the System Setup program, and check the System

Memory setting on the main System Setup screen.

13 The system should have already changed the value to reflect the newly

installed memory.

14 If the value is incorrect, one or more of the memory modules may not be

installed properly. Repeat step 2 through step 13 of this procedure to

ensure that the memory modules are firmly seated in their sockets.

15 Run the system memory test in the system diagnostics. See "Running the

Embedded System Diagnostics" in the Hardware Owner's Manual.

Information Update