DH Wireless Solutions PDN Genesis S2 Manual de campo - Página 6

Navegue en línea o descargue pdf Manual de campo para Teléfono de emergencia DH Wireless Solutions PDN Genesis S2. DH Wireless Solutions PDN Genesis S2 20 páginas.

Imprimir página
PDN Genesis
S2

GENERAL USE

Main Power Switch
Main Power Switch must be in
the "ON" position for the PDN
to function and charge .
When traveling by airplane,
the switch must be turned off,
cutting power to the PDN.
Charging
AC POWER PORT
(110-120V AC 50-60Hz)
To charge unit, plug
into AC Charging Port
via AC Power Cord with
Main Power Switch
"ON . " Battery Gauge
will scale to indicate
charge . Unit can run at
the same time that it is
being charged.
Note: Your PDN comes
preconfigured and assembled.
The unit is ready to use out of
the box. Please contact DHWS
if you require additional details
regarding internal components.
www.portablessupport.com
Field Manual
ON
OFF
Auxiliary
If battery charge is low
and an AC power
source is unavailable,
use the DC Power Port
to power the device .
DC Power Port is
operable with any
9-18V DC external
power source that
can be used with the
provided SAE terminated
cables . Unit will run
but not charge when
connected via Auxiliary
DC Power Port.
Standby Button enables and
disables the gateway . While in
standby mode, Battery Gauge will
still indicate charge . When charging,
lights will continuously scale from
bottom to top .
DC POWER PORT
(12V DC)
6
Battery Gauge &
Standby Button
Data
WAN (IN)
RJ45 PORTS:
LAN (OUT)
Use WAN (IN) RJ45 Port to
connect alternate Internet
source (i . e . modem, gateway,
or satellite) to the PDN . Use
the LAN (OUT) RJ45 Port to
provide a wired Internet
connection to switches,
routers, network extenders
and other devices as well as
a wired connection to the
PDN's embedded cellular
gateway GUI for configuration
changes and gateway status .
Both WAN and LAN ports
are programmable to be
LAN or WAN.