Dell PowerVault NX1950 Manual de actualización - Página 11

Navegue en línea o descargue pdf Manual de actualización para Servidor Dell PowerVault NX1950. Dell PowerVault NX1950 18 páginas. For vmware esx server software
También para Dell PowerVault NX1950: Manual de implantación (34 páginas), Manual de información importante (26 páginas), Primeros pasos (49 páginas), Manual de instalación y solución de problemas (48 páginas), Manual de implantación (38 páginas), Manual de referencia (4 páginas), Puesta en marcha (2 páginas), Utilizando (2 páginas), Manual de configuración (11 páginas)

5 Repeat step 1 to step 4 on the other node(s) and reboot.

NOTE:

Console are displayed when you restart the PowerVault NX1950 storage

solution. You must close the Microsoft Management Console before installing

the new Target.

6 Download the iSCSI 3.1 Software Target from the Dell Support website at

support.dell.com and install on all cluster nodes one at a time.

To uninstall the current 3.0 Target that is configured in a non-clustered

environment:

1 Close all applications.

2 From the Initiator, disconnect all Initiators from the Target(s).

3 Navigate to Add or Remove Programs and uninstall the Microsoft iSCSI

Target from the passive node(s) and allow for complete reboot.

4 Reboot the PowerVault NX1950 storage solution.

NOTE:

Console appear when you restart the PowerVault NX1950 storage solution.

You must close the Microsoft Management Console before installing the

new Target.

NOTE:

Storage Server 2003 SP2 which is a pre-requisite for the Active/Active Target

configuration.

5 Download and save the 3.1 Target from the Dell Support website at

support.dell.com on the PowerVault NX1950 storage system.

6 Install the 3.1 Target on the PowerVault NX1950 storage system.

NOTE:

create highly available iSCSI instance. Close the window and perform the

steps in "Creating a Target in a Non-Clustered Environment" on page 14 to

create a new Target.

The Dell Software Initialization Wizard and Microsoft Management

Ensure that your system is running Microsoft Windows Unified Data

After the 3.1 Target is successfully installed, you may be prompted to

Configuring 3.1 Target