Dell 1700 - Personal Laser Printer B/W Manual del usuario - Página 49
Navegue en línea o descargue pdf Manual del usuario para Monitor Dell 1700 - Personal Laser Printer B/W. Dell 1700 - Personal Laser Printer B/W 50 páginas. Dell vostro setting up
También para Dell 1700 - Personal Laser Printer B/W: Manual de configuración rápida (2 páginas), Configuración rápida (2 páginas), Características (2 páginas), Manual del usuario (24 páginas)
Imprimir página
FILE LOCATION: S:\systems\Great Belt\OM\Great Belt OM with
RED\GreatBelt_OM_A00\Source\battery.fm
For more information about QuickSet, right-click the QuickSet icon, and
then click Help.
®
®
Microsoft
Windows
The battery meter indicates the remaining battery charge. To check the
battery meter, double-click the
Charge Gauge
By either pressing once or pressing and holding the status button on the
battery charge gauge, you can check:
•
Battery charge (check by pressing and releasing the status button)
•
Battery health (check by pressing and holding the status button)
The battery operating time is largely determined by the number of times it is
charged. After hundreds of charge and discharge cycles, batteries lose some
charge capacity—or battery health. Therefore, a battery can show a status of
charged, but maintain a reduced charge capacity (health).
Check the Battery Charge
To check the battery charge, press and release the status button on the battery
charge gauge to illuminate the charge indicator lights. Each light represents
approximately 20 percent of the total battery charge. For example, if the
battery has 80 percent of its charge remaining, four of the lights are on. If no
lights are on, the battery has no charge.
Check the Battery Health
NOTE:
You can check battery health in one of two ways: by using the charge gauge
on the battery, as described below, and by using the Battery Meter in Dell QuickSet.
For information about QuickSet, right-click the QuickSet icon in the notification
area, and then click Help.
To check the battery health using the charge gauge, press and hold the status
button on the battery charge gauge for at least 3 seconds to illuminate the
health indicator lights. Each light represents incremental degradation. If no
lights appear, the battery is in good condition, and more than 80 percent of its
original charge capacity remains. If five lights appear, less than 60 percent of
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 3 0 / 0 7 - F O R P R O O F O N LY
Battery Meter
icon in the notification area.
49
Using a Battery