Dell E1709WFP Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Monitor Dell E1709WFP. Dell E1709WFP 28 páginas. Flat panel monitor
También para Dell E1709WFP: Puesta en marcha (2 páginas)

Imprimir página

Back to Contents Page

Operating the Monitor

Dell™ E1709W Flat Panel Monitor User's Guide

Using the Front Panel Controls

Using the On-Screen Display (OSD) Menu

Setting the Optimal Resolution

Using the Tilt

Using the Front Panel

Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls,

an OSD shows the numeric values of the characteristics as they change.

Front panel Button

Use the MENU button to launch the on-screen display (OSD) and select the OSD Menu. See

Use this button to directly access the "Brightness/Contrast" menu or to increase the values of the selected menu option.

Brightness&Contrast /Adjust

Use Auto Adjust to activate automatic setup/adjustment or to decrease the values of the selected menu option. The following

dialog appears on a black screen as the monitor self-adjusts to the current input:

Automatic Adjust /Adjust

Down

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further

tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.

NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.

Use this button to select an OSD menu option.

If VGA cable is not connected, a floating dialog box as shown below appears.

Select

Description

Accessing the Menu

System.