Allied Telesis SB251-10 Nota de publicación - Página 8
Navegue en línea o descargue pdf Nota de publicación para Software Allied Telesis SB251-10. Allied Telesis SB251-10 14 páginas. Patch for switchblade 4000 series switches and at-9800 series switches
Imprimir página
8
PCR: 03243
Module: SWI
After autonegotiation had finished between two ports, the port on the
SwitchBlade would not show link up status when the SHOW SWITCH
PORT command was executed. The autonegotiation process is now
restarted if autonegotiation is completed and the link is shown as down.
PCR: 03249
Module: SWI
The LEDs on line cards now continue to flash when activity exists.
Previously if a cable was connected and disconnected to Line 48 and G8
ports, with traffic being transmitted from the other end, then the LED
would stop flashing, even when there was activity on the link.
Features in SB251-03
Patch file details are listed in Table 8.
Table 8: Patch file details for Patch SB251-03.
Base Software Release File
Patch Release Date
Compressed Patch File Name
Compressed Patch File Size
Patch SB251-03 includes all issues resolved and enhancements released in
previous patches for Software Release 2.5.1, and the following enhancements:
PCR: 02361
Module: SWI
The SwitchBlade mirror port field on the second instance of a switch chip
was displaying as though it was the first instance. For example, if 2.26 was
configured as the mirror port, the GUI mirror object would return 2.2. The
first chip instance was not affected. This issue has been resolved.
PCR: 02527
Module: TCP
TCP6 did not send a TCP Reset message under some circumstances, for
example when the Telnet server was disabled. This issue has been resolved.
PCR: 03025
Module: GUI
A buffer address was incrementing and not returning buffers for reuse
when the command line interface was accessed via the GUI interface. This
issue has been resolved.
PCR: 03055
Module: SWI
If the SET SWITCH BLADE command was executed with the default
settings, then the default settings were added to the configuration file. The
SET SWITCH BLADE settings are now only added to the configuration file
if they differ from the default settings.
Patch Release Note
sb-251.rez
12-Mar-2003
sb251-03.paz
68784 bytes
Patch SB251-10 for Software Release 2.5.1
Level: 2
Level: 4
Level: 4
Level:3
Level:2
Level: 4
C613-10361-00 REV J