Dell DX6004S Visión general - Página 17

Navegue en línea o descargue pdf Visión general para Almacenamiento Dell DX6004S. Dell DX6004S 19 páginas. Document
También para Dell DX6004S: Manual complementario (4 páginas), Manual del usuario (46 páginas), Manual de instalación y configuración (43 páginas), Manual de instalación y configuración (35 páginas), Manual de introducción (28 páginas), Aviso (28 páginas), Aviso (20 páginas), Manual de configuración (9 páginas), Manual de configuración (9 páginas), Nota de publicación (8 páginas), Manual de configuración (7 páginas), Nota de publicación (6 páginas), Nota de publicación (5 páginas), Notas de publicación (5 páginas), Manual de introducción (49 páginas)

Imprimir página
Dell DX6004S Visión general
Option Name
[log] facility
[log] hostBindInterface
[connectionPool]
maxStoredConnections
[connectionPool]
connectTimeOut
[connectionPool] poolTimeOut
[scsp] port
[scsp] hosts
[scsp] clusterName
[remote] hostsConfigFile
The following is an example of the scspproxy.cfg file:
###
# Unlabeled
# Parameter set written at 22-Dec-09 22:48
Copyright © 2010 Caringo, Inc.
All rights reserved
Value
0
localhost
200 (minimum) to 4000
(maximum)
60
300
80
192.168.1.1 192.168.1.2
For example,
cluster.example.com
/etc/caringo/scspproxy/
hosts.cfg
14
Description
The log facility (i.e. channel)
to log to when using a syslog.
Valid values are 0-6
The interface to use for log
message headers
The number of connections
the proxy saves for reuse.
Dell recommends you set this
parameter to five times the
number of DX Storage cluster
nodes.
The amount of time in seconds
to wait for a connection to be
made
The amount of time in second
an unused connection remains
in the connection pool
The SCSP port number that
the nodes in the local DX
Storage cluster are listening on
IP addresses of hosts in the
local DX Storage cluster. Note
that this is used only if the
proxy is run with --staticlocator
on a non-CSN installation.
For a CSN configuration, this
option should be commented
out.
The name of the local DX
Storage cluster for use
in discovering node IP
addresses. This must match
the configured cluster
parameter in the cluster's
configuration file.
If the Proxy is installed on a
Cluster Services Node (CSN),
the cluster parameter is
set during the initial network
bootstrap process.
The path to the location of
the hosts.cfg file on the local
server
Version 1.2
December 2010