Dell PowerVault MD3060e Series Manual del administrador - Página 8

Navegue en línea o descargue pdf Manual del administrador para Almacenamiento Dell PowerVault MD3060e Series. Dell PowerVault MD3060e Series 35 páginas. Storage enclosure
También para Dell PowerVault MD3060e Series: Manual de hardware y software (25 páginas), Manual de instalación (11 páginas), Manual de introducción (10 páginas), Información actualizada (8 páginas), Instrucciones de instalación de la estantería (2 páginas), Puesta en marcha (2 páginas), Manual de implantación (24 páginas), Manual de introducción (10 páginas), Manual de implantación (24 páginas), Manual del usuario (40 páginas), Manual del administrador (48 páginas), Puesta en marcha (2 páginas)

About Your Host

When connecting to a Dell PowerEdge Server:

•

See the MD3060e Storage Enclosure Support Matrix for information on supported SAS Host-bus

Adapters (HBA's).

•

If the host is connected to the enclosure via multiple paths (2 or more SAS connections), the host

must have multipath configured properly. For more details on multipath configuration, please refer to

the documentation related to the operating system for the server.

The MD3060e Storage Enclosure is compatible with Windows and Linux operating systems. For more

details on the specific operating systems supported, please see dell.com/support.

Storage Enclosure Management Installation — Windows

You must configure Windows MPIO, for the Storage Enclosure Management Software to recognize the

hardware . See Microsoft documentation related to MPIO for configuration procedures.

NOTE: Dell recommends the Failover Only policy.

Download the Storage Enclosure Management Software installation package from dell.com/support.

Run the command prompt as an Administrator.

NOTE: The command prompt must be an Administrator prompt for proper use of the CLI.

Navigate to the download directory of the installer:

Execute the installer

StorageEnclosureManagment_Install.exe

Follow the on-screen instructions and accept the End User License Agreement.

After successful installation you will be able to execute secli commands from the command prompt.

Download the Storage Enclosure Management Software installation package from dell.com/support.

Run the command prompt as an Administrator.

NOTE: The command prompt must be an Administrator prompt for proper use of the CLI.

Navigate to the download directory of the extracted installer.

Run the installed program by running the command:

StorageEnclosureManagment_Install.exe –i silent

This command installs the Storage Enclosure Management Software with all the default settings. The

default installation directory is C:\Program Files\Dell\ StorageEnclosureManagment.

Accept all End User License Agreements.