Dell PowerVault MD3820f series Manual del usuario - Página 28
Navegue en línea o descargue pdf Manual del usuario para Almacenamiento Dell PowerVault MD3820f series. Dell PowerVault MD3820f series 47 páginas. Storage arrays
También para Dell PowerVault MD3820f series: Manual de implantación (34 páginas), Manual de introducción (8 páginas)
Imprimir página
Figure 19. Removing and Installing the RAID Controller Module Backup Battery Unit
1.
backup battery unit
Installing the RAID Controller Module Backup Battery Unit
CAUTION: Many repairs may only be done by a certified service technician. You must only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Align the backup battery unit with the slots on the RAID controller module.
2.
Slide the backup battery unit toward the connector on the RAID controller module.
3.
Tighten the screw that secures the backup battery unit to the RAID controller module.
4.
Close the RAID controller module.
5.
Replace the RAID controller module.
6.
Connect all the cables to the array.
7.
Turn on the array and the host server.
Power Supply/Cooling Fan Module
NOTE: Your storage array includes two integrated, hot-swappable power supply/cooling fan
modules.
The array supports two hot-swappable power supply/cooling fan modules. While the array can operate
temporarily with one module, both the modules must be present for proper system cooling.
CAUTION: A single power supply/cooling fan module can be removed from a powered-on array
for a maximum period of 5 minutes. Beyond that time, the array may automatically shut down to
prevent damage.
28
2.
screw