Dell PowerVault ML6000 Faq - Página 12

Navegue en línea o descargue pdf Faq para Almacenamiento Dell PowerVault ML6000. Dell PowerVault ML6000 26 páginas. Dell powervault ml6000 library managed encryption enablement instructions
También para Dell PowerVault ML6000: Manual de información importante (26 páginas), Primeros pasos (24 páginas), Primeros pasos (12 páginas), Manual de introducción (4 páginas), Manual de inicio rápido (7 páginas), Manual complementario (1 páginas)

8 Log in into the EKM by typing (login ekmuser: EKMAdmin

ekmpassword: changeMe) in the prompt.

9 Locate the SSL port in the redundant EKM by typing status.

10 Type the command: sync -all -ipaddr <redundant EKM

IP address>:<redundant SSL port> -rewrite.

How do I synchronize the redundant EKM anytime configuration

changes (like adding keys, adding key groups, adding drives, and so on)

are made to the primary EKM?

1 Stop the redundant EKM.

2 Collect the backup files from the primary EKM located at C:\ekm\backup

(default directory).

3 Replace the redundant EKM files at C:\ekm\gui with the files from

the primary EKM (files from step 2).

4 Restart the redundant EKM and note the IP address of the redundant EKM.

5 Launch the command line interface in the redundant EKM

(C:\ekm\client\startclient.bat).

6 Log in into the EKM by typing (login ekmuser: EKMAdmin

ekmpassword: changeMe) in the prompt.

7 Locate the SSL port in the redundant EKM by typing status.

8 Type the command: sync -all -ipaddr <redundant EKM

IP address>:<redundant SSL port> -rewrite.

The library-managed encryption setup is not clear as to what port is to be used

in the configuration. The library-managed encryption configuration requires an

IP address on the TCP port to access the EKM server. This information can be

located on the Health Monitor page of the EKM GUI.

EKM should be configured to run as a Windows or Linux-based service to

ensure that it restarts automatically if the server reboots.

Dell Encryption Key Manager and Library Managed Encryption