Dell PowerVault ML6000 Manual de inicio rápido - Página 3

Navegue en línea o descargue pdf Manual de inicio rápido para Almacenamiento Dell PowerVault ML6000. Dell PowerVault ML6000 7 páginas. Dell powervault ml6000 library managed encryption enablement instructions
También para Dell PowerVault ML6000: Manual de información importante (26 páginas), Primeros pasos (24 páginas), Primeros pasos (12 páginas), Manual de introducción (4 páginas), Faq (26 páginas), Manual complementario (1 páginas)

Imprimir página

Dell PowerVault ML6000 Manual de inicio rápido

3. On the EKM Server Certificate Configuration page (Figure 2) enter the key store alias and fill in any

additional fields that may serve to identify the certificate and its purpose. Click Submit and Start

Server.

Figure 2. EKM Server Certificate Configuration Page

Note: Interrupting the Encryption Key Manager GUI during key generation requires an Encryption

Key Manager re-install.

Keystore file corruption will occur if your stop the Encryption Key Manager key generation

process before it is complete. To recover from this event, follow these steps:

v If the Encryption Key Manager was interrupted during the initial install, navigate to the

directory where the directory is located (example x:\ekm). Delete the directory and restart

the install.

v If the Encryption Key Manager was interrupted while adding a new keygroup, stop your

Encryption Key Manager server, restore your keystore file with the latest backup keystore

(this file is located in your x:\ekm\gui\backupfiles folder). Note that the backup file

contains the date and time stamp as part of the file name (for example,

2007_11_19_16_38_31_EKMKeys.jck). The date and time stamp must be removed once the file

is copied into the x:\ekm\gui directory. Restart the Encryption Key Manager server and add

the key group that was previously interrupted.