Dell PS4100 Puesta en marcha - Página 2

Navegue en línea o descargue pdf Puesta en marcha para Almacenamiento Dell PS4100. Dell PS4100 2 páginas. Storage array
También para Dell PS4100: Manual de hardware (50 páginas), Visión general (7 páginas), Manual de instalación y configuración (41 páginas), Manual de mantenimiento del hardware (47 páginas)

Connect the Array to the Network

Recommended Configuration: For high performance and

availability, connect network cables to all the network

interfaces and distribute the connections across multiple

network switches. The switches must be connected with

interswitch links that have sufficient bandwidth.

Turn on Power to the Array

Before turning on power, allow enough time for the

array to adjust to ambient temperature and humidity

(for example, overnight).

The power switch on each power supply module is

located below the power plug. The switch is

oriented vertically. Turn on power to both power

supply modules (in any order).

Note: Batteries will start to charge and some

hardware components may start to synchronize

when power is turned on. Array LEDs will indicate

this normal activity.

Hardware Installation is Complete.

See the Installation and Setup guide to configure the array

software.

Information in this document is subject to change without

notice.

Reproduction in any manner whatsoever without the written

permission of Dell EqualLogic is strictly forbidden.

The Dell EqualLogic logo is a trademark of Dell, Inc.

Setting Up a PS Series Storage Array (continued)

CM0

Switch 0

CM1

Switch 1

Notes, Cautions, and Warnings

NOTE

indicates important information that helps you make

better use of your computer.

CAUTION

indicates potential damage to hardware or loss of

data if instructions are not followed.

WARNING

indicates a potential for property damage, personal

injury, or death.

Printed in U.S.A.

Printed on recycled paper.

R5DM1 rev.A00