Dell Storage Center SC220 Manual de servicio - Página 32
Navegue en línea o descargue pdf Manual de servicio para Almacenamiento Dell Storage Center SC220. Dell Storage Center SC220 36 páginas. Storage enclosures
También para Dell Storage Center SC220: Primeros pasos (14 páginas), Manual del usuario (27 páginas)
Imprimir página
Chapter 4 SC200/SC220 Specifications
Back-Panel Connectors (per EMM)
SAS connectors
Serial connector
LED Indicators
Front panel
Hard drive carrier
EMM
Power supply/cooling fan
Power Supplies
AC power supply (per power supply)
Wattage
Voltage
Heat dissipation
Input frequency
Max input power
Input current
Maximum inrush current
Available Hard Drive Power (Per Slot)
Supported hard drive power
consumption (continuous)
28
SAS A and B connectors for connection to the controller and for
expansion to an additional enclosure
Note: SAS connectors are SFF-8086/SFF-8088 compliant.
One 6-pin UART mini-DIN connector
Note: For engineering use only
•
One two-color LED indicator for system status
•
One single-color LED indicator for power status
•
One single-color activity LED
•
One two-color LED status indicator per drive
Three two-color LED status indicators, one for each of the two EMM
SAS ports and one for the EMM status
Three LED status indicators for power supply status, power supply/
cooling fan fault status, and AC status
700 W
+5V up to 155W; +12V up to 624W; +5Vsb up to 10W
100–240 VAC (8.6 A–4.3 A)
SC200: 191-147W
SC220: 133-114W
50/60 Hz
990KVA
11A@90VAC
Under typical line conditions and over the entire system ambient
operating range, the inrush current may reach 55A per power supply
for 10 ms or less.
•
SC200:
Up to 1.16 A at +5 V
Up to 1.6 A at +12 V
•
SC220:
Up to 1.2 A at +5 V
Up to 0.5 A at +12 V
Storage Center SC200 and SC220 Enclosures Service Guide