Dell Storage Center SCv2020 Manual del usuario - Página 13
Navegue en línea o descargue pdf Manual del usuario para Almacenamiento Dell Storage Center SCv2020. Dell Storage Center SCv2020 42 páginas. Storage center
También para Dell Storage Center SCv2020: Manual de introducción (19 páginas), Manual de introducción (20 páginas)
Imprimir página
Item Control/Feature
3
MGMT port
4
REPL port
5
SAS activity indicators
6
Storage controller
module status
7
Recessed power off
button
8
Storage controller
module fault
9
Recessed reset button
10
Identification LED
11
USB port
12
Diagnostic LEDs (8)
13
Serial port (3.5 mm mini
jack)
14
Four or two iSCSI ports
with two LEDs per port
15
Mini-SAS port B
16
Mini-SAS port A
About the SCv2000/SCv2020 Storage System
Icon Description
—
10 Mbps, 100 Mbps, or 1 Gbps Ethernet port used for storage
system management and access to the BMC
NOTE: To use the MGMT port as an iSCSI port for
replication to another Storage Center, a Flex Port license
and replication license are required. To use the MGMT port
as a front-end connection to host servers, a Flex Port
license is required.
—
10 Mbps, 100 Mbps, or 1 Gbps Ethernet/iSCSI port used for
replication to another Storage Center
NOTE: To use the RELP port as a front-end connection to
host servers, a Flex Port license is required.
—
•
Off: Port is off
•
Steady green: Port is on, but without activity
•
Blinking green: Port is on and there is activity
On: Storage controller completed POST
Powers down the storage controller if held for more than five
seconds
•
Off: No faults
•
Steady amber: Firmware has detected an error
•
Blinking amber:Storage controller is performing POST
Reboots the storage controller forcing it to restart at the POST
process
•
Off: Identification disabled
•
Blinking blue (for 15 sec.): Identification is enabled
•
Blinking blue (continuously): Storage controller shut down
to the Advanced Configuration and Power Interface (ACPI)
S5 state
Not for customer use on SCv2000/SCv2020 Storage Systems.
—
•
Green LEDs 0–3: Low byte hex POST code
•
Green LEDs 4–7: High byte hex POST code
Not for customer use.
—
•
Off: No power
•
Steady Amber: Link
•
Blinking Green: Activity
Back-end expansion port B
Back-end expansion port A
13