Dell Force10 MXL Blade Nota de aplicación - Página 3
Navegue en línea o descargue pdf Nota de aplicación para Interruptor Dell Force10 MXL Blade. Dell Force10 MXL Blade 6 páginas. 10/40gbe blade switches
También para Dell Force10 MXL Blade: Manual de introducción (38 páginas), Especificaciones (2 páginas), Manual (27 páginas)
Imprimir página
SFTOS #copy tftp://192.168.0.10/rsa2.key nvram:sshkey-rsa2
Mode........................................... TFTP
Set TFTP Server IP............................. 192.168.0.10
TFTP Path......................................
TFTP Filename.................................. rsa2.key
Data Type...................................... SSH RSA2 key
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
TFTP SSH key receive complete... updating key file...
Key file transfer operation completed successfully
SFTOS #copy tftp://192.168.0.10/dsa.key nvram:sshkey-dsa
Mode........................................... TFTP
Set TFTP Server IP............................. 192.168.0.10
TFTP Path......................................
TFTP Filename.................................. dsa.key
Data Type...................................... SSH DSA key
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
TFTP SSH key receive complete... updating key file...
Key file transfer operation completed successfully
3. Enable the SSH server with this command.
SFTOS Version <= 2.2.1
(SFTOS) #ip ssh server enable
To verify that the server has started, use this command to show the SSH server status and check the log file for
the following messages.
SFTOS #show ip ssh
SSH Configuration
Administrative Mode: .......................... Enabled
Protocol Levels: .............................. Versions 1 and 2
SSH Sessions Currently Active: ................ 0
Max SSH Sessions Allowed: ..................... 5
SSH Timeout: .................................. 5
SFTOS #show logging buffered
JAN 01 00:31:54 192.168.0.34-1 UNKN[222273672]: sshd_control.c(444) 15 %% SSHD: sshdListenTask
started
JAN 01 00:31:54 192.168.0.34-1 UNKN[209305936]: sshd_main.c(596) 16 %% SSHD: successfully
opened file ssh_host_dsa_key
JAN 01 00:31:54 192.168.0.34-1 UNKN[209305936]: sshd_main.c(609) 17 %% SSHD: successfully
loaded DSA key
JAN 01 00:31:54 192.168.0.34-1 UNKN[209305936]: sshd_main.c(631) 18 %% SSHD: successfully
opened file ssh_host_rsa_key
JAN 01 00:31:54 192.168.0.34-1 UNKN[209305936]: sshd_main.c(643) 19 %% SSHD: successfully
loaded RSA2 key
JAN 01 00:31:56 192.168.0.34-1 UNKN[209305936]: sshd_main.c(353) 20 %% SSHD: Done generating
server key
S-Series Secure Management
SFTOS (Config)#ip ssh server enable
- 3 -
SFTOS Version >= 2.3.1