Dell Force10 S4810 Manual de inicio rápido - Página 8
Navegue en línea o descargue pdf Manual de inicio rápido para Interruptor Dell Force10 S4810. Dell Force10 S4810 27 páginas. Dell force10 s4810 switch
También para Dell Force10 S4810: Manual de implantación (36 páginas), Manual de configuración (17 páginas), Manual de configuración (17 páginas)
Step
Task
Attach the brackets to the sides of the chassis at the PSU end, using four
2
screws for each bracket.
Attach the bracket so that the "ear" faces to the PSU and the outside of
the chassis.
View of chassis PSU side
Install chassis into 2-post rack or cabinet
Step
Task
Dell Force10 recommends that one person hold the S4810 chassis in
1
place while a second person attaches the brackets to the posts.
Attach the bracket "ears" to the rack or cabinet posts, using two screws
2
for each bracket. Ensure the screws are tightened firmly.
Attach a Ground Cable
The S4810 is shipped with 1 M4x0.7 screw for attaching a ground cable to the
chassis. The cable itself is not included. Dell Force10 recommends a 6AWG
one-hole lug, #10 hole size, 63" spacing (not included in shipping) to properly
ground the chassis. The one-hole lug must be a UL recognized, crimp-type lug.
NOTE: The rack installation ears are not suitable for grounding.
CAUTION: Grounding conductors must be made of copper. Do not use
aluminum conductors.
4
Installing the Hardware
Power Supply
Connect to
Rack/Cabinet
View from chassis I/O side
(ears)
Screws
Screws
Connect to
PSU0
PSU1
Rack Mounting
Ears
Rack/Cabinet
Post