Dell Networking S5000 Manual de introducción - Página 16
Navegue en línea o descargue pdf Manual de introducción para Interruptor Dell Networking S5000. Dell Networking S5000 37 páginas. Data center switch
También para Dell Networking S5000: Manual de instalación (50 páginas), Manual de configuración (12 páginas), Manual de configuración (17 páginas)
Imprimir página
Figure 12. Installing an Ethernet Module
1. Release latch
2. Ethernet Module
Important Points to Remember for Installing a Fibre Channel Module
•
You must insert the Fibre Channel module only in slot 0.
•
Installing and swapping of Fibre Channel modules must be done BEFORE power up. If you need to install or
replace a module, power down the system before you install or replace it. If you install or replace a module
when the system is powered up, the system does not recognize the module. Online insertion of modules can
result in a catastrophic failure.
•
The S5000 does not support the hot swapping of a Fibre Channel pluggable module during switch operations.
Instead, you must power down the switch before removing and replacing a Fibre Channel module.
WARNING: Electrostatic discharge (ESD) damage can occur if components are mishandled. Always wear an ESD-
preventive wrist or heel ground strap when handling the S5000 and its components.
16