Dell POWERCONNECT 5524P Notas de publicación - Página 13
Navegue en línea o descargue pdf Notas de publicación para Interruptor Dell POWERCONNECT 5524P. Dell POWERCONNECT 5524P 15 páginas. Powerconnect 5500 series
También para Dell POWERCONNECT 5524P: Manual de introducción (20 páginas)
Imprimir página
PC55xx - show clock detail output
different to user manual
Incorrect OID returned on
SNMPGetNext 55xx
PC55xx - SNMP ifType value of 6
for port-channel interfaces
GUI shows a fan led in red which
does not match the physical
status of the front led
PC55xx Connectivity issues with
fixed port setting and stacking.
PC55xx switch crashed on
snmpgetnext
1.3.6.1.4.1.89.59.2.3.1.9.2.2
System Firmware Version 4.1.0.16
PowerConnect 5500 Series Release Notes
Show clock in the device showed Summer
time range in dates instead of words
When using the SNMP GetNext on
1.3.6.1.2.1.2.2.1.1.1.9999 the incorrect OID is
returned
ifType for Post-Channels is the same as for
regular interfaces
Once the switch temperature goes below 40
degrees, the GUI shows a fan led in red which
does not match the physical status of the front
led
Use 2 PC55xx switches as stack and with
fixed port setting 100 Full. for example 1/0/1
and 2/0/1
After remove/power of the master unit, the
fixed port (gi2/0/1) did not do a linkup, but the
LED is on.
Device crashed when using snmpgetnext of
1.3.6.1.4.1.89.59.2.3.1.9.2.2
Subject to Change Without Notice
Fixed the code to match the
User Guide
Fixed the problem
Updated the MIB
information to comply
newer iANAifType definition
GUI now shows the right
status of the LED
Fixed the problem
Fixed the problem
Page 10