Dell PowerConnect 6248P Nota de publicación - Página 5
Navegue en línea o descargue pdf Nota de publicación para Interruptor Dell PowerConnect 6248P. Dell PowerConnect 6248P 34 páginas. Powerconnect 6200 series
También para Dell PowerConnect 6248P: Especificaciones (2 páginas)
Imprimir página
PowerConnect 6224/6224F/6224P/6248/6248P Release Notes
Added Functionality in this Release
Non-Stop Forwarding
This feature creates an option to allow the forwarding plane of stack units to continue to forward packets
while the control and management planes restart as a result of a power failure, hardware failure, or software
fault on the stack management unit. This type of operation is called non-stop forwarding. When the
management unit fails, only the management switch needs to be restarted.
Configuration of CX-4/Stacking Modules
This feature will allow the stacking and CX-4 plug-in modules to be configured to either role (Ethernet or
Stacking). By default, the module will function according to its module ID. Upon changing the role of a
module, a reboot of the switch will be required for the change to take effect.
Custom Protocol Based VLANs
Prior to the 3.2 release only ARP, IP and IPX are configurable as protocols for protocol-based VLANs.
This has been extended so that any Ethertype may be used.
Port Configuration Show Command
Added support for a single command that shows VLAN, STP, Port Status, and Port Configuration
information etc.
The new command is show interfaces detail {ethernet interface | port-channel port-channel-number}
where
•
interface—A valid Ethernet port.
•
port-channel-number—A valid port-channel trunk index.
Configurable Message of the Day Banner
The system supports a configurable message of the day banner that displays on the console. This feature is
configurable via the CLI or GUI and supports 1500 characters.
VLAN Name Support with RADIUS Server
This feature is an extension of Dot1x Option 81 feature added in Power Connect Release 2.1 to accept a
VLAN name as an alternative to a number when RADIUS indicates the Tunnel-Private-Group-ID for a
supplicant. Since this option is a string, it can also be used for a VLAN name. In order to support this
feature, VLAN names must be unique.
HTTP Download
Allow users to download files via an HTTP session. All file types which may be downloaded via TFTP are
supported.
System Firmware Version 3.2.0.6
Page 3