Dell PowerConnect M8024 Nota de publicación - Página 7
Navegue en línea o descargue pdf Nota de publicación para Interruptor Dell PowerConnect M8024. Dell PowerConnect M8024 9 páginas. Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
También para Dell PowerConnect M8024: Notas de publicación (27 páginas), Manual de configuración (21 páginas), Actualización del firmware (24 páginas)
User's Guide Updates
Configuring Dell PowerConnect
Title
Configuring an initial HTTPS password
Configuring Ports
Title
Port Configuration page, Admin Port Speed
Port Configuration page, Admin Advertisement
PowerConnect M8024 Release Notes
Description
The example in the user guide is incomplete. Issuing the first command
drops the user to the 'config-crypto-cert' config mode. At this point, just
exiting back to config is not enough to allow https to get enabled. The
user must enter values for common-name and country before exiting.
This will allow https server to be enabled when issuing "ip https server" at
global config mode.
console(config)#
console(config)#conf
console(config)#crypto certificate 1 generate
console(config-crypto-cert)#common-name 10.127.255.231
console(config-crypto-cert)#country us
console(config-crypto-cert)#duration 364
console(config-crypto-cert)#location Austin
console(config-crypto-cert)#organization-unit Dell
console(config-crypto-cert)#state tx
console(config-crypto-cert)#exit
console(config)#ip https server
console(config)#end
console(config)#
Description
The description of the Admin Port Speed field on the Port Configuration
page incorrectly states that "For the PowerConnect M8024, the only
available speed is 10000 Mbps." In reality, the PowerConnect M8024 also
supports port speeds of 1000 Mbps.
The description of the Admin Advertisement field on the Port Configuration
page states that the 10000 Full value indicates that the port is advertising
a 1000 Mbps speed, which is incorrect. The 10000 Full value indicates
that the port is advertising a 10000 Mbps speed.
Page 5