Dell PowerConnect M8024 Manual de configuración - Página 18
Navegue en línea o descargue pdf Manual de configuración para Interruptor Dell PowerConnect M8024. Dell PowerConnect M8024 21 páginas. Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
También para Dell PowerConnect M8024: Nota de publicación (9 páginas), Notas de publicación (27 páginas), Actualización del firmware (24 páginas)
Imprimir página
4.10
Configure out of band (OOB) management port
console(config)#interface out-of-band
console(config-if)#ip address ipaddress mask gateway
console(config-if)#exit
4.11
Configure login credentials
console(config)#line telnet
console(config-telnet)#login authentication default
console(config-telnet)#exit
console(config)#ip http authentication local
console(config)#username admin password yourpassword privilege 15
console(config)#enable password yourpassword
4.12
Configure Jumbo Frames
console(config)#interface range tengigabitethernet all
console(config-if)#mtu 9216
4.13
Configure spanning tree portfast on edge ports
console(config-if)#spanning-tree portfast
console(config-if)#exit
4.14
Enable flow control
console(config)#flowcontrol
This operation may take a few minutes.
Management interfaces will not be available during this time.
Are you sure you want to continue? (y/n)y
console(config)#exit
18
SCG1008
PowerConnect 8024, 8024F, M8024 and M8024-k Switch Configuration Guide for EqualLogic SANs