Dell PowerConnect M8428-k Manual - Página 7
Navegue en línea o descargue pdf Manual para Interruptor Dell PowerConnect M8428-k. Dell PowerConnect M8428-k 25 páginas. Dell poweredge m710 and m710hd - system memory update
También para Dell PowerConnect M8428-k: Manual de actualización (32 páginas), Notas de publicación (27 páginas), Manual del usuario (23 páginas), Manual de actualización (1 páginas)
Imprimir página
• Downlink (server blade) does not support the link protocol of the port group to which it is
attached
• Uplink (remote peer) does not support the link protocol of the port group to which it is attached
The following drawing demonstrates link protocol mismatch conditions:
Blade Configuration:
KR
KX4
KX
KR
KX4
KX
KX4
KX4
KR
KX4
KX
KR
KX4
KX
KX4
KX4
1.4
LED Behavior
The LED behavior is described in the following table:
Table 3 - LED Behavior
Condition
Link down
Figure 2: Link Protocol Mismatch Examples
Module Configuration:
SFP+ SR
SFP+ SR
SFP+ SR
SFP+ LR
SFP+ LR
SFP+ LR
No Cable
EMPTY
Passive Cable
Passive Cable
Passive Cable
SFP
SFP
SFP
SFP+ LRM
SFP+ LR, No Link
Green LED
Amber LED
off
off
Description
This condition occurs in the following cases:
•
Server blade not present, powered down, or link is
inactive
•
Uplink port module not present
•
Uplink port cable not connected
•
One or both of the internal and/or external links is
down
Rev 1.00
Link up
Blade is not KR
Blade is not KR
Link up
Blade is not KR
Blade is not KR
No cable detected
Module not present
Link up
Blade is not KR
Blade is not KR
Module is SFP (1GbE)
Module is SFP (1GbE)
Module is SFP (1GbE)
LRM module not supported
No link with remote side
7