Dell PowerEdge 6400 Instalación de bastidores - Página 28

Navegue en línea o descargue pdf Instalación de bastidores para Interruptor Dell PowerEdge 6400. Dell PowerEdge 6400 34 páginas. Wake-on-lan (wol) support on dell servers
También para Dell PowerEdge 6400: Instalación de bastidores (37 páginas), Manual de instalación de la actualización (42 páginas), Manual de instalación (42 páginas), Manual de instalación (37 páginas), Manual (10 páginas), Instalación (4 páginas), Montaje e instalación (32 páginas), Manual (10 páginas), Manual (15 páginas)

(Rev. 9/8/00) FILE LOCATION: S:\SYSTEMS\MARCONI\Rackingd\7U\05KCEa00\05KCEeb0.fm

Rack Installation Guide

Installing the Cable Tray

Attach the cable tray to the PowerEdge computer chassis using five 6-32 x 0.25-inch

hex-head Phillips screws (see Figure 11).

NOTICE: The cable tray and its mounting are not sturdy enough to support

the weight of the PowerEdge chassis, so do not grasp the cable tray when

lifting the system. You should lift the system only by the chassis edges.

Figure 11. Installing the Cable Tray

You can install the cable-management arm on either side of the cable tray. See the

section "Reversing the Cable-Management Arm Installation" found later in this guide.

Facing the back of the rack cabinet, attach the right-angle bracket of the cable-

management arm to the cabinet's back vertical rail and secure it with the captive

thumbscrews (see Figure 12). The bracket slides into the square mounting holes

on the vertical rail.

DELL CONFIDENTIAL - Preliminary

cable tray

6-32 x 0.25-inch hex-head

Phillips screws (5)

9/8/00