Dell PowerEdge M620 Información actualizada - Página 2

Navegue en línea o descargue pdf Información actualizada para Interruptor Dell PowerEdge M620. Dell PowerEdge M620 38 páginas. Dell poweredge blade servers getting started guide
También para Dell PowerEdge M620: Notas de publicación (27 páginas), Manual (25 páginas), Manual del usuario (23 páginas), Manual de información importante (35 páginas), Manual de actualización (32 páginas), Manual de actualización (28 páginas), Manual del usuario (26 páginas), Manual del usuario (22 páginas), Manual de introducción (12 páginas), Manual de introducción (12 páginas), Manual técnico (46 páginas), Manual técnico (49 páginas), Manual de cartera (27 páginas), Manual técnico (44 páginas), Manual de introducción (14 páginas), Manual de introducción (12 páginas)

Low Voltage Memory Modules (DDR3L DIMMs)

Intel Xeon 5600 series processors support DDR3L DIMMs enabling a lower

operating voltage (1.35 V) that ensures memory power savings up to 20% per

DIMM. DDR3L memory is backward-compatible to Intel Xeon 5500 series and

operates at standard voltage (1.5 V) without any limitations.

Operating the system memory at a lower voltage may cause restrictions to

additional frequency and memory population capabilities. For example,

populating three memory modules per channel is not supported at 1.35 V.

Systems with 1.35 V DDR3L memory operates the memory modules at 1.5 V

if any of the following conditions exist:

•

Intel Xeon 5500 series processors

•

Two 1333 MHz DIMMs per channel

•

A combination of both standard and low voltage memory modules

For information on the memory configuration guidelines, see your system's

Hardware Owner's Manual at support.dell.com/manuals.

NOTE:

BIOS setup options allow the user to control frequency and voltage

configuration within allowable limits.

New BIOS Setup Options

Integrated Devices Screen

Option

SR-IOV-Global Enable

(Disabled default)

Description

Enables/disables BIOS configuration of Single Root

I/O Virtualization (SR-IOV) devices.

NOTE:

Applies to PowerEdge R410, R510, R610, R710, R910,

T410, T610, and T710 systems only.