Dell PowerEdge M710HD Manual de introducción - Página 3

Navegue en línea o descargue pdf Manual de introducción para Interruptor Dell PowerEdge M710HD. Dell PowerEdge M710HD 14 páginas. Dell poweredge blade servers getting started guide
También para Dell PowerEdge M710HD: Manual de actualización (44 páginas), Manual de actualización (21 páginas), Manual de actualización (14 páginas), Manual de instalación (7 páginas), Manual de actualización (1 páginas), Manual de introducción (12 páginas), Manual de introducción (12 páginas), Manual de cartera (27 páginas), Manual de introducción (12 páginas)

Installation And Configuration

WARNING: Before performing the following procedure, review the safety instructions that came with the blade

server or enclosure.

NOTE: The system is intended for restricted access location in accordance with the National Electric Code,

National Standards Institute (ANSI/National Fire Protection Association (NFPA) 70.

Unpack your blade server or enclosure and identify each item.

Installing The Enclosure In The Rack

Figure 1. Installing the Enclosure in the Rack

Assemble the rails and install the enclosure in the rack, following the safety instructions and the rail installation

instructions that shipped with the rail kit.

Installing A Sleeve In The Enclosure

NOTE: This procedure applies only to PowerEdge M420.

A sleeve includes up to four quarter-height blades to function as a system. Depending on your order, the sleeve may

ship with the blades preinstalled.

CAUTION: Exercise utmost care when installing or removing the sleeve to prevent damage to the internal

components. To ensure protection for the electronic components inside, follow the Electrostatic Discharge (ESD)

guidelines.