Dell PowerEdge M820 Systems Notas de publicación - Página 3

Navegue en línea o descargue pdf Notas de publicación para Interruptor Dell PowerEdge M820 Systems. Dell PowerEdge M820 Systems 27 páginas. Dell poweredge blade servers getting started guide
También para Dell PowerEdge M820 Systems: Información actualizada (38 páginas), Manual del usuario (23 páginas), Manual de información importante (35 páginas), Manual de actualización (32 páginas), Manual de actualización (28 páginas), Manual del usuario (26 páginas), Manual del usuario (22 páginas), Manual de introducción (12 páginas), Manual del usuario (3 páginas), Manual técnico (46 páginas), Manual de cartera (27 páginas), Manual de introducción (14 páginas), Manual de introducción (12 páginas), Manual técnico (47 páginas)

Imprimir página
Dell PowerEdge M820 Systems Notas de publicación
PowerConnect M6220/M6348/8024/8024F/M8024/M8024-k/
7024/7048/7024P/7048P/7024F/7048R/7048R-RA Release Notes

Introduction

This document provides specific information for the Dell PowerConnect 7024/7048/7024P/7048P/7024F/7048R/7048R-
RA/8024/8024F/M6220/M6348/M8024/M8024-k switches firmware version 4.1.0.6.
It is recommended that this release note be thoroughly reviewed prior to installing or upgrading of this product.

Global Support

For information regarding the latest available firmware, release note revisions, or additional assistance, please visit
support.dell.com.

Firmware Specifications

Firmware Version
Firmware Image Name
PCM6220v4.1.0.6.stk
PC7000_M6348v4.1.0.6.stk
PC8024v4.1.0.6.stk
PCM8024v4.1.0.6.stk
PCM8024kv4.1.0.6.stk
Version number
PowerConnect
4
1
Series


Firmware Version Details
Boot PROM Name
Not Applicable
Firmware Upgrade
NOTE:
Switches migrating from pre-4.x.x.x versions of code require a
boot code update. Connect to the serial port and follow the procedure
below to update the boot code:
1.
Download the new firmware version to the switch
2.
After the download completes, activate the new image using the boot system image command
3.
Reload the switch using the reload command
After the switch boots, select 2 – Start Boot Menu
4.
Select 7 – Update Boot Code from the menu
5.
After the boot code updates, select 9 – Reset the system.
6.
System Firmware Version 4.1.0.6
Version Numbering Convention
Description
0
6
Four part version number

Denotes the build number.

Denotes an ad hoc release of the product software.
Denotes a scheduled maintenance release of the product software.
Denotes a major version number.
Version No.
4.1.0.6
Version No.
4.1.0.6
4.1.0.6
4.1.0.6
4.1.0.6
4.1.0.6
Release Date
March 2011
Release Date
March 2011
March 2011
March 2011
March 2011
March 2011
Page 1