Dell PowerEdge M820 Systems Manual técnico - Página 25

Navegue en línea o descargue pdf Manual técnico para Interruptor Dell PowerEdge M820 Systems. Dell PowerEdge M820 Systems 47 páginas. Dell poweredge blade servers getting started guide
También para Dell PowerEdge M820 Systems: Información actualizada (38 páginas), Notas de publicación (27 páginas), Manual del usuario (23 páginas), Manual de información importante (35 páginas), Manual de actualización (32 páginas), Manual de actualización (28 páginas), Manual del usuario (26 páginas), Manual del usuario (22 páginas), Manual de introducción (12 páginas), Manual del usuario (3 páginas), Manual técnico (46 páginas), Manual de cartera (27 páginas), Manual de introducción (14 páginas), Manual de introducción (12 páginas)

Imprimir página
Dell PowerEdge M820 Systems Manual técnico
Table 13 lists the available Select Network Adapter options and their supported features for the
M820.
Table 13.
Features
Ports x link speed
Supported speed
SR-IOV
ISCSI HBA
FCoE
Switch independent partitioning
DCB
DCB with iSCSI TLV
1
Only 10Gb ports have iSCSI HBA support.
2
Only 10Gb ports have FCoE support.
3
Only 10Gb ports have switch independent partitioning support. The maximum number of partitions supported is
eight (four partitions per 10GE port).
4
Only 10Gb ports have DCB support.
5
Only 10Gb ports have ISCSI TLV support.

System management integration

With M820, the job of deploying, updating, monitoring and maintaining the Select Network Adapters
is fast and easy. System management integration features include the following:
Pre-boot: Using the Dell Lifecycle Controller graphical user interface (GUI) to set configuration
such as bandwidth allocation or firmware revision level
Post-boot: Agent-free out-of-band or high-speed in-band connection over LOM through the
Operating System/BMC pass-through feature for sensory information
Automation of firmware and driver version deployment upon component replacement
Automatic monitoring of NIC status and notification on SNMP traps
Local or remote re-configuration of any NIC, physical or virtual
PXE boot enabled on all LOM and NDCs for ease of use
Boot from SAN (iSCSI, FCoE) configuration for networking devices through the Lifecycle
Controller GUI
PowerEdge M820 Technical Guide
25
Supported Select Network Adapter options and features
Broadcom
57810S-k
2x10Gb
1Gb and 10Gb
Not supported
Supported
Supported
Supported
Supported
Supported
Intel X520-k
2x10Gb
1Gb and 10Gb
Supported
1
Not supported
2
2
Supported
3
Not supported
2
4
Supported
5
5
Supported
QLogic
QMD8262-k
2x10Gb
10Gb only
Not supported
Supported
Supported
Supported
Supported
Supported