Dell S4048-ON Manual de configuración - Página 15

Navegue en línea o descargue pdf Manual de configuración para Interruptor Dell S4048-ON. Dell S4048-ON 19 páginas. Enterprise switches
También para Dell S4048-ON: Manual de configuración (30 páginas), Manual de solución de problemas (29 páginas)

Imprimir página

Optional stack configuration

Note: If you wish to use a stack configuration instead of LAG, follow the instructions in this section

instead of those in section 2.

One advantage of stacked switches is that they can be managed as a single switch. However, firmware

updates will update all members of the stack simultaneously and therefore should only be done during

planned downtime.

5.1

Delete startup configuration on first switch

Dell>enable

Dell#delete startup-config

Proceed to delete startup-config [confirm yes/no]yes

Dell#reload

System configuration has been modified. Save? [yes/no]no

Proceed with reload [confirm yes/no]yes

Note: The switch will reboot.

5.2

Configure stack on the first switch

Dell>enable

After the startup configuration is deleted, the factory default Enable mode password is calvin.

Dell#configure

Dell(conf)#stack-unit 1 priority 1

Dell(conf)#stack-unit 1 stack-group 12

Dell(conf)#stack-unit 1 stack-group 13

Dell(conf)#exit

Dell#copy running-config startup-config

Dell#reload

5.3

Delete startup configuration on the second switch

Dell>enable

Dell#delete startup-config

Proceed to delete startup-config [confirm yes/no]yes

Dell#reload

SCG1026

Dell Networking S4048-ON Switch Configuration Guide for PS Series SANs