Dell S4048T-ON Manual de introducción - Página 29
Navegue en línea o descargue pdf Manual de introducción para Interruptor Dell S4048T-ON. Dell S4048T-ON 35 páginas.
Imprimir página
Host name configuration
The host name appears in the prompt. The default host name is Dell.
Host names must start with a letter, end with a letter or digit, and must have characters,
letters, digits, and hyphens in the string.
•
Create a host name.
CONFIGURATION mode
hostname name
Remote access
You can configure the S4048T–ON system for Telnet remote access.
The system has a dedicated management port and a management routing table that is
separate from the IP routing table.
Configure as described in the following sections:
•
Management port configuration
•
Management port configuration
•
Username and password configuration
Management port configuration
1
Enter INTERFACE mode for the Management port.
To access the system remotely, assign IP addresses to the management ports.
CONFIGURATION mode
interface ManagementEthernet slot/port
2
Assign an IP address to the interface.
INTERFACE mode
ip address ip-address/mask
3
Enable the interface.
Software configuration
29