Dell S4048T-ON Manual de introducción - Página 5

Navegue en línea o descargue pdf Manual de introducción para Interruptor Dell S4048T-ON. Dell S4048T-ON 35 páginas.

•

Ground your system using a copper ground conductor.

•

Clean and coat all bare grounding connection points on your system with an anti-oxidant

solution before making connections.

•

Bring all unplated surfaces on your system to a bright finish and treat them with an anti-

oxidant solution before making connections.

•

Remove any non-conductive surfaces on your system from the threads and connection

points to ensure electrical continuity.

•

Use the two-hole, Listed, compression-type lug with an AWG 14 gauge wire that uses 4-

in/lb to secure your system to the frame.

NOTE:

The S4048T-ON can operate at -40.5 to -60 VDC at a maximum current level

of 24A or at 100–240 VAC at a maximum current level of 7.1A.

NOTE:

The S4048T-ON is Earthquake Z4-compliant when you attach the

ReadyRails to the frame using threaded hardware. Do not use the tool-less or two-

post installation methods.

NEBS compliance