Dell S4148-ON Manual de configuración - Página 10

Navegue en línea o descargue pdf Manual de configuración para Interruptor Dell S4148-ON. Dell S4148-ON 19 páginas. Dell emc sc series sans

Dell EMC recommended switch configuration

2.9

iSCSI enable

The steps in this section enable iSCSI auto-detection of attached storage arrays and switch auto-

configuration. Dell PS Series and SC Series storage arrays are detected by the switch when iscsi is enabled.

The switch will auto-configure for Jumbo frames with MTU 9216 and flowcontrol receive on, and transmit off

for all the ports. The ports detected to be connected to the storage units are auto-configured as spanning-tree

edge ports withunicast storm control disabled.

OS10(config)# iscsi enable

OS10(config)# iscsi session-monitoring enable

Note: Do not change the LLDP description on the SC Series array. Changing this will disable iSCSI storage

detection and iSCSI auto-configuration.

Note: iSCSI auto-configuration on OS10 switch ports is not supported with QLogic

adapters on SC Series arrays.

2.10

Note: This step is optional because iSCSI auto-detection and auto-configuration enabled in the previous step

will enable Jumbo frames with MTU 9216 and enable receive flowcontrol on all ports, once PS Series or SC

Series storage ports are detected on the switch.

OS10(config)# interface range ethernet 1/1/1 – 1/1/54

OS10(conf-range-eth1/1/1-1/1/54)# mtu 9216

OS10(conf-range-eth1/1/1-1/1/54)# flowcontrol receive on

OS10(conf-range-eth1/1/1-1/1/54)# flowcontrol transmit off

2.11

OS10(conf-range-eth1/1/1-1/1/54)# spanning-tree port type edge

OS10(conf-range-eth1/1/1-1/1/54)# exit

Note: Spanning tree is enabled by default. If there is a need to reconfigure it, use the following command.

OS10(config)# no spanning-tree disable

OS10(config)# exit

2.12

OS10# copy running-configuration startup-configuration

OS10# reload

System configuration has been modified. Save? [yes/no]: yes

Proceed to reboot the system? [confirm yes/no]:yes

10 Dell EMC Networking S4148-ON and S4128-ON Switch Configuration Guide for Dell EMC SC Series SANs | SCG3704

QLE4062 network