Allied Telesis AT-PBPWRDC Manual de instalación rápida

Navegue en línea o descargue pdf Manual de instalación rápida para Fuente de alimentación Allied Telesis AT-PBPWRDC. Allied Telesis AT-PBPWRDC 2 páginas. Optional redundant power supply

Imprimir página

Technical Specifications

Input Supply Voltage:

Power Consumption:

Maximum Operating Temperature:

Maximum Storage Temperature:

Humidity:

Electrical Safety:

Electrical Safety and Emission Statement

Standards: This product meets the following standards.

U.S. Federal Communications Commission

RADIATED ENERGY

Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to

Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with this instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void your right to

operate this equipment.

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du

Canada.

RFI Emission

EN55022 Class A, EN61000-3-2, EN61000-3-3

Warning: In a domestic environment this product may cause radio interference in which case the user may be

required to take adequate measures.

Immunity

EN55024

Electrical Safety

EN60950, UL1950 (UL/cUL)

from Allied Telesyn International, Corp.

Allied Telesyn International Corp.

960 Stewart Drive, Suite B

Sunnyvale, CA 94085 USA

Tel 1 (408) 730-0950 • Fax 1 (408) 736-0100

Visit our web site at: www.alliedtelesyn.co

48 V DC, 3A maximum

150 watts maximum

0° C to 50° C (32° F to 122° F)

-25 °C to 70 °C (-13 °F to 158° F)

5% to 95% maximum (non-condensing)

UL 1950, (UL/cUL), EN60950

Industry Canada

AT-PBPWRDC

Optional Redundant Power Supply

Quick Install Guide

For use in a PowerBlade Chassis

Overview

The AT-PBPWRDC is an optional DC power supply for the PowerBlade Chassis. When

installed, the optional power supply shares the load of powering the chassis with the

main power supply. This is known as "load-sharing." In the event the main power

supply fails, the redundant power supply will provide full power to the chassis, thereby

preventing a system failure.

The main and redundant power supplies can be "hot swapped," meaning that should

either power supply fail, the failed power supply can be removed and replaced with a

new power module while the chassis is operating. Network operations will not be

interrupted.