AVYCON CAT6 Manual de inicio rápido - Página 2

Navegue en línea o descargue pdf Manual de inicio rápido para Cámara IP AVYCON CAT6. AVYCON CAT6 2 páginas. Fixed turret camera
También para AVYCON CAT6: Manual de inicio rápido (2 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (2 páginas)

Imprimir página
3.
Ceiling Mounting complete.
4.
For Wall Mounting, drill into wall at marked drill holes deep
enough to accommodate for mounting hardware.
• If using the included hardware, insert the three drywall
anchors into holes in the mounting surface and align holes in
camera mounting plate with anchors. Then use included
screws to secure mounting plate and camera to wall.
Drywall Anchors
Mounting Screws
5.
Wall Mounting complete.
6.
Bracket Adjustments
• Using the included security wrench, you can loosen the three
bracket screws to make adjustments to the pan, tilt, and
rotation of the camera lens and body to allow for the best
possible view for your application. Once you have positioned
the camera in the orientation that works best for you, use the
security wrench to tighten the bracket screws.
360°
Security Wrench
90°
360°
NETWORK CABLE SETUP
1
2
①
Loosen the nut from the main element.
②
Run the network cable (without RJ45 connector) through both
elements. Then crimp the cable with the RJ45 connector.
③
Connect the cable to the female portion of the waterproof connector,
then tighten the nut and the main cover.
CAUTION
PLEASE CONFIRM THAT VOLTAGE OF POWER SUPPLY USED MATCHES POWER
REQUIRED BY CAMERA, OTHERWISE PERMANENT DAMAGE OR RISK OF FIRE
MAY OCCUR
NETWORK CONNECTION
Switch
Network Cable
Network Cable
IPC
Router
① Make sure that the camera and the PC are connected to the local network.
② Install the IP Device Tool from the CD and run it after installation.
Note: DHCP is enabled by default.
③ Camera Activation: Click on the IP address of the camera you want to
activate, which will open that camera's system in your web browser.
Alternatively, if you already know the IP address of your camera, you
can manually enter it into the address bar of your web browser to
reach the same screen.
④
The first time you access the camera, you will be prompted to choose
6
a password that must be between 8 to 15 characters. Once you are
done, click on the 'OK' button to confirm your login information. The
camera is now activated.
3
⑤ After setting up your credentials, you can access the camera by
logging into the system with the password you just created.
7
MENU
Computer
RESOURCES
1) Visit www.avycon.com
2) Search for the model number of your product.
3) Click on your product and find appropriate documents on product page.
Technical Support E-mail :
Technical Support Website :
US Helpdesk Number :
Toll Free Number (Canada) :
NETWORK IP CAMERA
8
Need help?
www.avycon.com
1 (949) 752-7606
1 (888) 833-4611
[M-F, 6am-5pm PST]