360 Hunting Blinds Metal Tower Stand Instrucciones de instalación - Página 9

Navegue en línea o descargue pdf Instrucciones de instalación para Instrumentos de medida 360 Hunting Blinds Metal Tower Stand. 360 Hunting Blinds Metal Tower Stand 11 páginas.

Imprimir página

Grab the adjustable hook end of each cable brace

and hook it into the hole designed for it on the

oposite corner.

When ﬁ nished the cable braces should create an X

on each side of the tower stand.

Tighten each of the adjustable hooks on the cable

braces equally with a sturdy tool until cables are

snug. Be careful not to over-tighten.

Use a heavy sledge hammer to secure the

tower stand in place with the included stakes which

should be driven through the holes provided in

each towner stand foot.

Move the ladder into postion on the stand so it ﬁ ts

snugly into place against the ladder attachment

pipe. The included u-bolts should be used to fasten

the ladder platform to the ladder attachment pipe

on the tower stand.

Use two U bolts and four ﬂ at washers.