Allied Vision MANTA Manual - Página 2
Navegue en línea o descargue pdf Manual para Accesorios Allied Vision MANTA. Allied Vision MANTA 18 páginas.
Imprimir página4. Warranty conditions
Allied Vision warranty does not cover any damage to the sensor as soon as the cover glass or the circular
protection foil is removed. TCG and RCG cameras have the standard warranty on the electronics, but
excluding sensor:
Camera series
Electronics warranty
Table 1: Warranty duration by camera series
Warranty conditions
i
For the warranty of cameras and sensors, see
www.alliedvision.com/en/support/warranty.
5. Common instructions
Damage to the camera electronics and sensor
• Work in a dust-free environment (class 100 or better) with humidity according
• Observe notes for
• Follow the instructions thoroughly.
5.1. Unpacking cameras
Keep camera packaging
• To store the camera
• To ship the camera back in case of damage.
1. Open the shipping box.
2. Take out the ESD bag with the camera.
3. Take the camera out of the ESD bag.
5.2. Checking the camera function
With this simple test, you can check that the sensor of your new Allied Vision camera is working properly.
No lens is required.
1. Connect the camera to a PC.
2. Start Vimba Viewer or another Viewer application to acquire an image.
3. Wave your hand in front of the sensor.
The viewer shows a camera image of a moving shadow. This proves proper camera function.
4. Continue with the corresponding instructions:
•
6. Instructions for housed Alvium cameras – RCG
•
7. Instructions for Alvium bare board cameras – TCG
•
8. Instructions for Manta cameras – RCG
•
9. Instructions for Prosilica GT cameras – TCG
Alvium housed cameras
3 years
to ESD requirements.
3.1. Electrostatic discharge (ESD)
on page 7
on page 8.
Page 2 of 18
Preparing Cameras without
Alvium bare board cameras
2 years
NOTICE
on page 3
on page 4
Sensor Cover Glass
Manta
Prosilica
3 years
3 years
on page 1.