EarthWay 2170 Manual de instrucciones de montaje - Página 4

Navegue en línea o descargue pdf Manual de instrucciones de montaje para Esparcidor EarthWay 2170. EarthWay 2170 12 páginas. Commercial broadcast spreader with side spread control
También para EarthWay 2170: Manual de instrucciones de montaje y funcionamiento (6 páginas), Manual de instrucciones de montaje y funcionamiento (8 páginas), Manual de instrucciones (8 páginas), Manual de instrucciones de montaje y funcionamiento (6 páginas), Manual de instrucciones de montaje (10 páginas)

Assembly and Operation Instructions

NOTE: Notch on bearings and lower handles. Bearings

must go through flat side of lower handle (from the

outside to the inside).

NOW GO BACK AND TIGHTEN ALL NUTS AND BOLTS STARTING WITH FIRST STEP. DO NOT OVER TIGHTEN.

Slide axle bushing over axle and into axle

Step 7:

bearing to both sides as shown.

Install drive wheel onto the axle and align with

Step 8:

the cotter pin hole nearest to lower handles as shown.

Insert 2" cotter pin through wheel and through axle.

Bend with pliers to prevent pin from falling out.

Install coast wheel onto the axle fully, then

Step 9:

using outside cotter pin hole, insert 1" cotter pin through

axle (not thru the wheel). Bend with pliers to prevent pin

from falling out.

P2170_M52164_Rev_May2020_compressed

PAGE 4