Christie CP2220 Hoja de instrucciones - Página 2

Navegue en línea o descargue pdf Hoja de instrucciones para Bastidores y soportes Christie CP2220. Christie CP2220 6 páginas. Christie rack mount pedestal
También para Christie CP2220: Boletín técnico (6 páginas), Hoja de instrucciones (9 páginas), Boletín técnico (8 páginas), Manual (2 páginas), Manual de instalación y configuración (19 páginas)

Widen a Cathode Clamp Instruction Sheet

Remove the Lamp

This procedure describes the removal of the lamp from a Christie CP4230 projector. For removal

instructions that are specific to your projector model, see the projector Service Manual.

1. Turn the lamp off and cool the projector for at least 15 minutes.

2. Turn the projector off and disconnect it from AC power.

3. Put on your protective clothing and face shield.

4. Unlock and open the lamp door.

5. Undo the three clips on the cathode lamp duct and remove the duct.

6. Loosen the cathode screw on the cathode clamp.

Widen a Cathode Clamp Instruction Sheet

020-101328-01 Rev. 1 (01-2014)