Miele PW 6101 Manual de instrucciones de programación - Página 38
Navegue en línea o descargue pdf Manual de instrucciones de programación para Lavadora Miele PW 6101. Miele PW 6101 48 páginas. Profitronic m innovation m
También para Miele PW 6101: Manual de instrucciones (44 páginas), Manual de instrucciones (46 páginas), Manual de instrucciones de programación (48 páginas)
Imprimir página
Chip cards
Dispensing data
This menu can be used to copy all
dispensing data relating to an existing
programme in the machine onto a card.
Existing dispensing data is only overwritten
after another confirmation to do so.
Dispensing type, dispensing phase 1, 2
(dispenser pumps, dispensing amount and
level) and dispensing stop 1, 2 (yes or no)
are then carried out for each programme. If
you change dispensing agent it is easy to
change the dispensing amount to suit.
Only those dispenser pumps which are
active are listed.
Main menu ~ Data to card
Dispensing
Programme
^ The following will appear in the display
after you have made your selection and
pressed the rotary dial:
Data to card ~ Dispensing
If dispensing data already exists on the card
the following message will appear in the
display:
Data to card ~ Dispensing
Overwrite existing data?
^ Press the S "Save" button to overwrite the
existing data.
If you press the A button or, if you do not
touch any buttons in the next 30 seconds the
overwriting procedure will not be carried out
and you will be taken back to the sub menu.
38
D
S
Programme data
This menu can be used to copy a max. of 30
programmes to a card. The programmes will
be copied one after the other according to
the programme number in the machine. If
there is only one programme on the card
then the card can be used to run the
programme.
Main menu ~ Data to card
Programme
Settings
^ After making your selection the following
appears in the display:
-
e
Data to card ~ Programme
A
1
Cottons
2
Cottons
^ After selecting a programme press the
rotary dial to highlight it.
Data to card ~ Programme
1 B
Cottons
A
2
Cottons
To copy all programmes press the "1-999"
button.
^ After pressing the S button data will be
copied.
If there is not enough memory to save all
A
selected programmes to the card the
following will appear in the display:
Data to card ~ Programme
Insufficient memory
-
A
90 °C
e
60 °C
A
1-999
90 °C
e
60 °C
S
A
1-999
A
M.-Nr. 06 533 430