Miele G 1 Series Manual - Página 24

Navegue en línea o descargue pdf Manual para Lavavajillas Miele G 1 Series. Miele G 1 Series 46 páginas.
También para Miele G 1 Series: Manual (14 páginas)

Imprimir página

Technical Information

3. Release the Start/Stop button.

4. Immediately press the Start/Stop button 5 times; on the 5th time, hold

until the "Start/Stop" LED flashes.

5. Release the Start/Stop button.

6. If the "Start/Stop" LED does not light up, repeat the procedure.

Acknowledgement indicator:

The "Start/Stop" LED flashes rapidly (5 flashes per second).

Options:

For reset, water hardness and rinse aid settings, turn the selector switch to

the position indicated in Table 15. For all other settings, turn the selector

switch to the 11 o'clock position. The setting will be indicated via the flashing

rhythm of the "Rinse" LED. See Table 15.

Function

Reset

Water hardness setting

Dispensed rinse aid

quantity setting

Resetting standard

settings

Adjust wash temperature

Programming

Turn the selector switch to

the 1 o'clock position. To

reset all parameters to the

delivery condition, press

the Start/Stop button.

Turn the selector switch to

3 o'clock. To change the

water hardness setting,

press the Start/Stop

button.

Turn the selector switch to

the 5 o'clock position. To

change the dispensed

rinse aid amount, press

the Start/Stop button.

Press the Start/Stop

button 1x.Turn the selector

switch to 9 o'clock. To

reset all parameters to the

factory setting, press the

Start/Stop button.

Press the Start/Stop

button 3x.Turn the selector

switch to 3 o'clock. To

change the temperature,

press the Start/Stop

button.

G 1xxx/G 2xxx

Display

With this program function, all

parameters can be reset to the

delivery condition. The "Rinse" LED

flashes 1x briefly intermittently. If

the "Rinse" LED is off, at least one

setting was modified. If the "Rinse"

LED flashes, the parameters are as

in the delivery condition.

Setting range: 1 - 70 °d (1 - 74.9

gpg). If the "Rinse" LED flashes 4x,

this corresponds to the standard

setting of 12 - 15°d (12.8 - 16.1 gpg);

see Table 16.

The set value is indicated by the

"Rinse" LED flash pattern. If this LED

flashes 3x rapidly at intervals, this

corresponds to the standard setting

of 0.1 fl.oz. (3 mL). Range: 0 - 0.2

fl.oz. (0 - 6 mL); see Table 17.

With this programming function, all

parameters that can be modified by

the customer can be reset to their

factory settings. If the "Rinse" LED is

off, at least one setting was

modified. If the "Rinse" LED flashes,

the parameters are as in the factory

setting.

"Rinse" LED is off = wash

temperature per factory setting;

"Rinse" LED flashes = increased

wash temperature. Increased wash

temperature results in longer

running time.