Miele G 1202 Manual - Página 8

Navegue en línea o descargue pdf Manual para Lavavajillas Miele G 1202. Miele G 1202 46 páginas.
También para Miele G 1202: Manual (14 páginas)

Imprimir página
Technical Information
Rinse Aid Volume [mL]

Table 4: Rinse Aid Quantities, G 118x/G 2170/G 218x

1
One milliliter equals 0.3 fluid ounces.
2
Standard setting.
2.2

Optima - G 1202

Initial requirements:
1. Close the door.
2. Switch off the appliance.
Accessing:
1. Press and hold the Start/Stop button.
2. Switch on the appliance.
3. Release the Start/Stop button.
4. Immediately press the Start/Stop button 5 times; on the 5th time, hold
until the "Start/Stop" LED flashes (5 flashes per second).
5. Release the Start/Stop button.
6. If the "Start/Stop" LED does not light up, repeat the procedure.
Options:
Function
Software version ID check
Reset
1
Flash Pattern of "SaniWash" LED
0
1
2
3
4
5
6
Programming
Do not press the Delay
Start button. The "Delay
Start" LED is not lit.
Press the Delay Start
button 1x. The "Delay
Start" LED flashes 1x
rapidly intermittently.
Press the Start/Stop
button to reset all standard
settings.
8
G 1xxx/G 2xxx
—
1x rapidly
2x rapidly
2
3x rapidly
4x rapidly
5x rapidly
6x rapidly
Display
"Rinse" LED is out or flashes. The
display shows the software version
ID no. in consecutive digits
(e.g., -1304).
The "Rinse" LED is out or flashes.
This programmable function can be
used to reset all modifiable
parameters to their standard
settings. The display shows p and a
digit alternately: p0 = Non-standard
settings have been made; p1 = All
settings reset to standard settings
or no modifications have been
made.