Miele G 2 Series Manual - Página 38

Navegue en línea o descargue pdf Manual para Lavavajillas Miele G 2 Series. Miele G 2 Series 46 páginas.
También para Miele G 2 Series: Manual (14 páginas)

Imprimir página

Technical Information

Function

Save extras

Setting the temperature

format

Activating/deactivating

the buzzer

Activating/deactivating

the confirmation tone

Brightness adjustment

Activating/deactivating

the memory

Activating the dealer

demo mode

Resetting standard

settings

Adjusting the wash/final

rinse temperature

Water quantity

normal/increased

Activating/deactivating

sensor softener, manually

setting water hardness

Program running

time reduction

Programming

Select Save extras.

Select a setting and

confirm with OK.

Select Temperature.

Select a format and

confirm with OK.

Select Buzzer.

Select a setting and

confirm with OK.

Select Keypad tone.

Select a setting and

confirm with OK.

Select Brightness. Select

a setting using the

Dimmer and Brighter

buttons and confirm with

OK.

Select Memory. Select a

setting and confirm with

OK.

Select Dealer. Select a

setting and confirm with

OK.

Select Factory default.

To reset the parameters

(settings) modified by the

customer to their standard

settings, confirm with OK.

Select Temperatures.

Select Main wash or Final

rinse. Make a setting and

confirm with OK.

Select Water plus. Select

a setting; confirm with OK.

Select Water hardness.

Select a setting and

confirm with OK.

Select Shorten the

program. Make the

desired selection and

confirm with OK.

G 1xxx/G 2xxx

Display

This function is activated in the

standard settings. In the display,

this is signaled with the message

On. If you do not wish to save,

select Off.

The temperature can be displayed

in °C or °F as desired.

The options Off, Normal and Loud

are shown in the display.

Options: On (standard), Off.

The brightness of the display can

be set in 17 levels, with level 8 as

the standard setting. Brightness

levels are displayed in bar form.

Options: On (standard setting) and

Off. The memory function saves the

last selected program.

For options, see Section 2.13.

The display reads Reset factory

default settings?

Options: Normal and Increased.

Increased wash temperature results

in a longer running time.

Options: Normal and Increased. If

Increased is selected, water intake

increases by 16.7 fl.oz. (500mL).

Automatic = Sensor softener

activated. The water hardness at

the installation site can also be

manually set. Water hardness

range: 1°d to 70°d (1.1 to 74.9 gpg).

For information on external water

softeners, see Section 2.14.

The display shows the options On

and Off (standard setting).

Program-dependent running time is

reduced by reducing temperatures

and/or canceling holding times.