Allmand PORT-A-LITE Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Luz de trabajo Allmand PORT-A-LITE. Allmand PORT-A-LITE 20 páginas.

OPERATION PROCEDURES

Before operating the tower light, review Safety

on page 5-6.

To remove light fixture from storage on base

and attach light fixture to mast prior to use:

1. Remove the light fixture nut handle and the

three washers retaining the light fixture to

the base unit and remove the light fixture

from the storage bolt.

LIGHT FIXTURE

2. Place one of the plastic washers on top of

the mast bolt. Then set the light fixture on

top of the mast aligning the hole in the light

fixture yoke with the mast bolt, place the

other plastic washer, one metal washer and

the nut handle, then tighten to secure the

light fixture on the mast.

OPERATION

MAST BOLT

SHO NUT HANDLE

4. Connect the male three-pin connector on

light fixture cord to the female three-pin con-

nector on the base unit cord. Screw on the

retaining collar until tight.

5. Move the light fixture to the desired position.

By rotating the lens and reflector and/or by

the light fixture mount.

MALE THTREE-

PIN CONNECTOR

FEMALE

THREE-PIN

CONNECTOR