Miele Vita 50 Manual de instalación - Página 25
Navegue en línea o descargue pdf Manual de instalación para Lavavajillas Miele Vita 50. Miele Vita 50 37 páginas. Commercial dishwasher
Imprimir página
Plug and socket connection recommended to facilitate
electrical safety tests. Socket must be accessible after
installation. On hard-wired machines, a multi-pole circuit
breaker with a minimum contact gap of 3 mm must be
provided on site. The use of an earth leakage circuit breaker
(ELCB) is strongly recommended.
If necessary, equipotential bonding with good galvanic contact
must be provided in accordance with all appropriate national
and local regulations.
Cold water
Max. water hardness
Min. flow pressure
Max. pressure
Throughput
On-site connection thread according to DIN 44 991
Length of connection hose (supplied)
DVGW approved
Water connection Australia:
To prevent back-syphonage, the water connection must be
via an approved Dual-Check-Valve supplied with the
machine.
Hot water
Max. temperature
Max. water hardness
Min. flow pressure
Max. pressure
Throughput
On-site connection thread according to DIN 44 991
Length of connection hose (supplied)
DVGW approved
Water connection Australia:
To prevent back-syphonage, the water connection must be
via an approved Dual-Check-Valve supplied with the
machine.
Waste water
Drain hose (Int. dia. × wall thickness × l)
Max. head height (measured from floor)
Max. transient throughput per drain hose
Hose sleeve for drain hose to be provided on site
(ext. dia. x l)
External
Dispenser connection (DOS G 60) for liquid detergent at rear
dispensing
of machine
(optional)
Machine data
Height
Width
Depth
Installation should only be carried out by authorised fitters in accordance with valid regulations!
Observe installation instructions when installing machine! Adjacent cabinetry should be made from commercial-grade
materials to prevent damage from steam and condensate. All rights reserved! Measurements in mm
Installationsplan G 7856
Stand: 19.01.2004
°dH
60
kPa
200
kPa
1000
l/min
7.5
Inch
3/4" external thread
(USA: 11.5 NH)
mm
1700
°C
70
°dH
60
kPa
200
KPa
1000
l/min
7.5
Inch
3/4" external thread
(USA: 11.5 NH)
mm
1700
mm
22 x 6 x 1500
m
1.0
l/min
16
mm
22 x 30
mm
850
mm
598
mm
600
Seite 5