Miele DA 1260 Instrucciones de uso e instalación - Página 23

Navegue en línea o descargue pdf Instrucciones de uso e instalación para Campana de ventilación Miele DA 1260. Miele DA 1260 48 páginas.
También para Miele DA 1260: Instrucciones de uso e instalación (44 páginas), Instrucciones de uso e instalación (44 páginas), Instrucciones de uso e instalación (44 páginas)

Changing a lamp

The lamps should be replaced with a

lamp of the same type:

Manufacturer ............................... EGLO

Lamp type .................................... GU10

Specification................................ 11427

Wattage ........................................... 3 W

ILCOS D Code...... DR-3-H-GU10-50/56

Alternatively the following lamps can be

used:

Manufacturer ............................... EGLO

Lamp type .................................... GU10

Specification................................ 11511

Wattage ........................................... 5 W

ILCOS D Code...... DR-5-H-GU10-50/54

These lamps have a different luminosity.

Only use lamps of the same type in the

cooker hood.

These lamps are available from Miele or

from specialist retailers.

 Switch off the fan and the lighting.

 Remove the grease filters.

 Disconnect the cooker hood from the

mains electrical supply (see "Warning

and Safety instructions").



The lamps can get hot in use.

Allow the lamps to cool down for a

few minutes before changing them.

Cleaning and care

 Loosen the halogen lamp's securing

screw a little.

 Slide the screw and the lamp

downwards.

 Then tighten the screw again.

 Turn the lamp anti-clockwise and pull

it out.

 Screw the new lamp into the socket.

Please follow the manufacturer's

safety instructions.

 Slightly loosen the screw again, push

the lamp upwards, and tighten the

screw.

 Replace the grease filters.