Miele DA 2390 Instrucciones de uso e instalación - Página 24

Navegue en línea o descargue pdf Instrucciones de uso e instalación para Campana de ventilación Miele DA 2390. Miele DA 2390 36 páginas. Ventilation system
También para Miele DA 2390: Instrucciones de uso e instalación (40 páginas), Instrucciones de uso e instalación (40 páginas), Instrucciones de uso e instalación (36 páginas), Instrucciones de uso e instalación (40 páginas), Instrucciones de uso e instalación (36 páginas)

Installation



Before installation, it is important

to read the information given on the

following pages as well as the

"Warning and Safety instructions" at

the beginning of this booklet.

The rangehood is intended to be built

into wall units, rangehood housing

units, and above breakfast bars or

island areas.

 Check prior to installation that the top

of the appliance will be accessible

after installation.

If this is not the case, install the exhaust

ducting and prepare the mains

connection before installation.

1 exhaust connection

for exhaust ducting  150 mm.

1 non-return flap

for fitting into the exhaust connection

on the motor unit (not needed for

recirculation mode). Depending on

model, the non-return flap may already

be fitted.

4 M5 x 40 mm screws, 4 washers,

4 M5 nuts for securing the rangehood

to an interim shelf.

10 M4 x 8 mm screws for securing the

rangehood.

4 M4 x 12 mm screws for additional

securing of the rangehood to uneven

surfaces.

Conversion kit for recirculation

mode

including directional unit, aluminium

hose and hose clips (the conversion kit

is not supplied and must be purchased

separately. See "Technical data").