Miele DA 3360 Instrucciones de uso e instalación - Página 25
Navegue en línea o descargue pdf Instrucciones de uso e instalación para Campana de ventilación Miele DA 3360. Miele DA 3360 36 páginas.
También para Miele DA 3360: Manual de instrucciones (36 páginas)
Imprimir página
^ Remove the protective film between
the deflector plate and the housing.
^ Secure the front of the appliance to
the floor of the housing unit from
below using 4 screws.
To avoid damaging the deflector plate
when it is pulled out, care should be
taken to screw the fixing screws in
straight, and to ensure that the
screwheads are countersunk.
^ Secure the spacer strip to the back of
the appliance from behind using 4
plastic rivets as shown.
Attaching the lightshield
^ Attach the lightshield (if using).
A DML 400 installation kit, available as
an optional accessory, is required for
this.
Follow the installation instructions
supplied.
Warning: Failure to install the screws or
fixing device in accordance with the
instructions may result in electrical
hazards.
Weight of a lightshield matching
existing furniture
The lightshield must not exceed 1300 g
in weight.
This applies to lightshields with a depth
of up to 30 mm.
For larger or heavier lightshields, the
weight must be reduced, e.g. by
trimming it down at the back.
Installation
25