Miele DA 3466 Instrucciones de uso e instalación - Página 6
Navegue en línea o descargue pdf Instrucciones de uso e instalación para Campana de ventilación Miele DA 3466. Miele DA 3466 48 páginas.
También para Miele DA 3466: Instrucciones de uso e instalación (48 páginas), Instrucciones de uso e instalación (48 páginas), Instrucciones de uso e instalación (48 páginas), Instrucciones de uso e instalación (48 páginas)
![Miele DA 3466 Instrucciones de uso e instalación](/uploads/products/server2/3426293/3426293.jpg)
IMPORTANT SAFETY INSTRUCTIONS
Be certain your appliance is properly installed and grounded by a
qualified technician. To guarantee the electrical safety of this
appliance, continuity must exist between the appliance and an
effective grounding system. It is imperative that this basic safety
requirement be met. If there is any doubt, have the electrical system
of the house checked by a qualified electrician.
Reliable and safe operation of this hood can only be guaranteed if
it has been connected to the electrical supply.
To avoid damaging the ventilation hood, make sure that the
connection data (voltage and frequency) on the data plate
correspond to the building's power supply before connecting the
appliance.
If in doubt, consult a qualified electrician.
Do not use a power bar or extension cord to connect the
ventilation hood to electricity. These are a fire hazard and do not
guarantee the required level of appliance safety.
To ensure safe operation, only use the ventilation hood after it has
been properly installed.
This ventilation hood may not be used in non-stationary locations
(e.g. on a ship).
Adequate ventilation must be provided when the hood is operated
simultaneously with devices that burn gas or other fuels.
Only open the housing as described in the enclosed "Installation
diagram" and in the "Cleaning and care" section of this manual.
Under no circumstances should any other parts of the housing be
opened.
Tampering with electrical connections or components and
mechanical parts is highly dangerous to the user and can cause
operation faults.
6