Miele DA 5330 W Manual de funcionamiento e instalación - Página 21

Navegue en línea o descargue pdf Manual de funcionamiento e instalación para Campana de ventilación Miele DA 5330 W. Miele DA 5330 W 40 páginas. Cooker hood

Miele DA 5330 W Manual de funcionamiento e instalación
A range of Miele branded cleaning and
conditioning products is available to
order from Miele (see back page for
details) or via the internet at
www.miele-shop.com.
,
Before any cleaning or
maintenance work is carried out,
disconnect the cooker hood from the
mains supply.
Please note that this appliance has
two electrical connections, and both
have to be disconnected for
cleaning and maintenance work.
,
Halogen lamps get very hot
during use and remain hot for some
time after being switched off. The
hot lamps are also susceptible to
damage from damp cleaning. Wait a
few minutes after switching off
before commencing cleaning.

Housing

General
The surfaces and controls are
susceptible to scratches and
abrasions. Please observe the
following cleaning instructions.
^ All external surfaces and controls can
be cleaned using an E-Cloth, or with
warm water and a little washing-up
liquid applied with a well wrung-out
soft sponge or cloth.
^ Wipe the surfaces dry using a soft
cloth.

Cleaning and care

Do not use too much water when
cleaning the controls. Water could
penetrate into the electronics and
cause damage.
Do not use:
– cleaning agents containing soda,
acids, chlorides or solvents,
– abrasive cleaning agents e.g.
powder cleaners or cream cleaners,
and abrasive sponges, e.g. pot
scourers or sponges which have
been previously used with abrasive
cleaning agents. These will damage
the surface material.
Important for appliances with
stainless steel housing
(This infomation does not apply to the
controls).
Stainless steel surfaces can be cleaned
using the Miele E-Cloth or with a
suitable, non-abrasive, proprietary
cleaning agent for stainless steel,
following the manufacturer's
instructions on the packaging.
To help prevent re-soiling, a
conditioning agent for stainless steel
can also be used. Apply sparingly and
follow the manufacturer's instructions
on the packaging.
21